Soffit & Fascia Replacement in Janesville, WI
Peeling paint, soft wood, sagging panels, or deterioration along the edge of your roof can be easy to overlook from the ground. But once those areas start showing damage, it’s worth figuring out what’s actually going on before it spreads further. Wilco Exteriors replaces soffit and fascia for homeowners in Janesville, WI, and throughout Southern Wisconsin and Northern Illinois, using durable vinyl and aluminum materials, starting with a free inspection.
Clean Up the Roofline
Peeling, warped, or loose material along the roof edge is one of the more visible signs a house needs attention. Replacing it restores a clean, finished look to the entire roofline.
Deal With Damaged Areas Properly
Covering up deteriorated soffit or fascia without addressing what’s underneath doesn’t actually fix anything. We look at the condition of the material and the area around it before recommending what to replace.
Support Proper Ventilation
Vented soffit is one part of how a house lets air into the attic. Replacing damaged or blocked soffit with a properly installed vented option helps that part of the system do its job.
What's Actually Under the Edge of Your Roof?
Most homeowners can point to the general area but couldn’t tell you which part is soffit and which is fascia, and that’s completely normal. Fascia is the finished vertical board that runs along the edge of the roof, right where your gutters are usually attached. Soffit is the finished underside of the roof overhang, the part you’d see if you stood underneath the eave and looked straight up. Depending on how the house was built, soffit sometimes includes vents that let air into the attic as part of the home’s ventilation system.
These pieces don’t exist on their own. Fascia holds the gutters, so damaged fascia can let gutters pull loose or hang wrong. Soffit sits right below the roof edge, so if water is getting past the gutters or finding its way in around the roofline, the soffit is often where it shows up first. That’s why replacing a damaged section without figuring out why it got damaged can leave you fixing the same spot again in a year or two. Not every damaged area points to a bigger problem elsewhere, but it’s worth checking rather than assuming.
Look Up at the Roof Edge
A lot of soffit and fascia damage sits above eye level, so it’s easy to miss until it’s fairly obvious. Here’s what we typically find when we go looking:
Soft, rotting, or otherwise deteriorated fascia boards
Soffit panels that are sagging, cracked, or coming loose
Peeling paint or staining along the roofline
Gaps or holes around the eaves
Gutters starting to pull away from fascia that’s no longer solid enough to hold them
Finding one bad section doesn’t mean the whole roofline needs to be replaced. An inspection is really about figuring out how far the damage actually goes, whether it’s contained to one area, and whether something else, like a gutter or roofing issue, is contributing to it.
Fix the Problem, Not Just What You Can See
Locally owned and operated. We know how Wisconsin winters and Illinois humidity treat soffit and fascia over time, and we account for that when we recommend materials.
Licensed, bonded, and insured.
One crew handles your project. From measuring through installation and cleanup.
Plain-language quotes. If your soffit and fascia doesn’t need replacing yet, we’ll tell you.
Installations are backed by manufacturer and workmanship warranty coverage. Financing options may be available.
From Damaged Roofline to Finished Exterior
Here’s what to expect, start to finish.
Inspect the Roofline
We look at the soffit, fascia, roof edge, and where the gutters attach, and note any visible signs of deterioration.
Determine What Needs Attention
We identify which sections are actually damaged and figure out the right scope of work, rather than assuming the whole roofline needs to come down.
Replace and Finish
We remove the damaged material, install the new soffit and fascia, and reconnect the gutters cleanly so the roofline looks finished, not patched.
Client Testimonials
Reviews from Janesville, WI & Illinois homeowners we’ve helped with soffit and fascia replacement.
Questions About Soffit & Fascia
Fascia is the vertical board along the edge of the roof where gutters attach. Soffit is the finished underside of the roof overhang, and it sometimes includes vents for attic airflow.
Soft or rotting wood, sagging or cracked panels, peeling paint, gaps around the eaves, or gutters pulling loose are the usual signs.
Ongoing moisture exposure is the most common cause, often from water that isn’t draining properly off the roof or through the gutters.
If the soffit includes intake vents and those get blocked or damaged, it can affect airflow into the attic. It’s one piece of a larger ventilation system, not the whole thing.
Yes. We can replace fascia and reconnect your existing gutters, or replace both at once if the gutters need attention too.
Often, yes. If the damage is contained to one area, we can typically address that section rather than the entire roofline.
It depends on how much of the roofline needs work and which materials you choose. We provide free inspections with exact pricing for your home.
Don't Ignore What's Happening Along the Roofline
Peeling paint, sagging panels, soft wood, or gutters starting to pull loose are easy to notice and easy to put off, especially when you’re not sure if it’s a soffit problem, a fascia problem, or something else entirely.
Wilco Exteriors serves homeowners across Southern Wisconsin and Northern Illinois with free soffit and fascia inspections. We’ll tell you what’s actually going on and what it would take to fix it.